| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name F SHAH
Al-Jubail, Saudi Arabia - Street Address
Contact: PHONE NUMBER AVAILABLE E Mail: EMAIL AVAILABLE,
EMAIL AVAILABLE
PIPING MATERIALS ENGINEER
Professional experience of 7 years in the oil & gas and petrochemical
domains, as a Piping Materials Engineer. I have acquired proficiency in the
various facets of piping materials engineering, by having worked in a range
of significantly large scale Detail Engineering (EPC) projects.
Technical competence:
. Piping design codes & standards: Adept at industry piping design codes &
standards such as ASME, ASTM, API, BS, MSS-SP, NACE and PIP, applicable
to process plant piping.
. Piping Material Specifications: Create / determine piping class
specifications according to ASME B31.3, relevant ASME dimensional and
pressure-integrity standards, with respect to given fluid classification
and base material requirements.
. Valves & Valve Material Specifications: Comprehensive knowledge of gate,
globe, check, ball, butterfly & other special valves- Preparing valve
specifications/ datasheets; reviewing valve GA drawings from vendors.
. Calculations:
. Pipe wall thickness calculations: Thorough experience in performing &
checking calculations for pipe wall thickness, using both computer-
aided and manual design techniques.
. Vacuum thickness calculations: Corroborate wall thickness for pipes
under external pressure, for the full/partial vacuum conditions.
. Underground pipe thickness calculations: Perform calculations for
underground lines.
. Branch reinforcement calculations: Verify branch reinforcement
requirements based on ASME B31.3 calculations & subsequently formulate
branch tables.
. Specialty Items: Thorough knowledge of piping special items like
strainers, steam traps, sample coolers, flame arrestors, safely shower/
eye washes, sight glasses, hoses & hose connectors,
. Metallic/ Non-metallic Piping: In addition to the customary metallic
piping (CS, SS, AS), have experience with non-metallic piping systems
such as RTR (GRE, GRP).
. Line Lists data: Prepare Line List, complete with all Engineering Data
like radiography, LP/MP tests, PWHT etc. Calculation of hydrostatic test
pressure for each line based on ASME B31.3 & the line design conditions
from Process.
. Material Take Off/ Bill of materials: - Confident in leading and
undertaking piping bulk & in-line accessory MTO's. Appreciate the
importance of various stages of MTO and accuracy needed to support
project cost estimates. Application of contingency percentage (bump),
based on the stage & quality of the MTO, to determine the quantity of
material to be requisitioned.
. 3D support (PDS inputs): Specialist knowledge in materials database
management and material control with 3D CAD systems like PDS.
. Material/ Purchase Requisitions: Prepare Technical purchase specification
to support RFQ's and PO's for piping Bulk materials & specialty items.
Capable of generation and issue of requisitions, and management and
control of its changes including quantities.
. Technical Bid evaluations: Experience in technical bid evaluation of
piping vendor quotations. Capable of giving technical recommendation of
suppliers for the bulk piping materials, valves and special piping items.
. Vendor Drawing Review: Reviews Vendor Drawings for bulk items like valves
and various specialty items like strainers, steam traps, sample coolers,
safety showers etc.
. Piping Insulation & painting: Experience in the development of Painting,
Insulation and Coating & Wrapping specifications.
. Experience in producing Piping Standard Details for the Piping Layout
group. Core competency in process/utility P&ID's and plant layouts.
. Adequate exposure to adopt a practical approach to piping material
problems with familiarity of the requirements/interactions with other
engineering disciplines and site.
. Fine exposure in holding techno-commercial meetings with national &
international vendors of repute.
Managing Work and Performance:
. Excellent time management skills with proven ability to work accurately
and quickly prioritize, coordinate and consolidate tasks, whilst
simultaneously managing the diverse range of function from multiple
sources.
. Can work with minimal supervision and lead a small specialist team by
providing clear technical directions and decision making.
. Set goals and targets, check, verify and take corrective actions as &
when required.
. Lead work share effort & delegate work ensuring targets are met or
exceeded.
. As an experienced member of the team, I am self motivated and involved in
originating and completing tasks, to enhance the overall team
performance. Extend the role in to the wider disciplines taking complete
responsibility for the assigned work.
Continuous Improvement:
. Prepared to take on new tasks and guide others in new technical subjects.
. Respond positively to feedback from others.
. Keep abreast with the latest technological advancement and continued
professional development through self-advancement and attending technical
trainings.
[pic]
PROFESSIONAL EXPERIENCE IN VARIOUS ORGANISATIONS:
1. SAMSUNG ENGINEERING - AL-JUBAIL, SAUDI ARABIA JUL'2011
-PRESENT
Detailed Engineering Projects:
|Title: |Clean Transportation at Riyadh Refinery Project |
|Owner: |Saudi Arabian Oil Company - Saudi ARAMCO |
| | |
|Licensor: |Axens & UOP. |
|Highlights: |Challenging experience working on this very old brown |
| |field project that has multiple units built by various EPC|
| |contractors & licensed by diverse process licensors. |
| |Currently working as the main Piping Material Engineer for|
| |this project. |
| |Thorough exposure in working with Aramco Standards- SAMSS,|
| |SAES, SAEP, IR 175 inspections, NMR's and other Armaco |
| |project specific requirements. |
| |Preparation of Piping specification, taking into |
| |consideration the existing multiple specifications already|
| |in use in the existing plant. The new specification is |
| |developed very carefully to take into account tie-ins with|
| |existing plant. |
| |Tie-in works done in very compressed schedule with spec |
| |preparation, material take-off, MR floating, TBE, PO |
| |placement done in a very short span of time. |
| | |
|Title: |Wasit Co-generation & Steam generation Project |
|Owner: |Saudi Arabian Oil Company - Saudi ARAMCO |
| | |
|Licensor: |Axens, IFP Group Technologies. |
|Highlights: |Deputed to Seoul (South Korea) at the Samsung Headquarters|
| |as a materials engineering specialist for a span of 3 |
| |months (Nov'11-Jan'12). |
| |Prepared the piping specifications for this project and |
| |carried out all other piping materials related work. |
| |Carried out the technical bid evaluation of all the piping|
| |bulk items. |
| |Resolution of technical issues with the client (ARAMCO) |
| |and with the respective vendors. |
| | |
Proposal /Bidding Jobs:
|Title: |BAPCO Bahrain Refinery, SRU #3 Modification Project - |
| |Proposal Job |
|Owner: |BAPCO - Bahrain Petroleum Company, B.S.C. |
| | |
| | |
|Highlights: |Handled all the piping materials engineering work for this|
| |proposal job. |
|Title: |LUBEREF Yanbu Refinery Expansion - PDA Revamp - Proposal |
| |Job |
|Owner: |Saudi Aramco Lubricating Oil Refining Company. |
| | |
| | |
|Highlights: |Handled all the piping materials engineering work for this|
| |proposal job |
|Title: |Clean Transportation Fuels, Riyadh Refinery - Proposal Job|
|Owner: |Saudi Arabian Oil Company - Saudi ARAMCO |
| | |
| | |
|Highlights: |Handled all the piping materials engineering work for this|
| |proposal job |
2. LARSEN & TOUBRO-CHIYODA LTD, (LTC)
JUL'2007 - JUN'2011
Detailed Engineering Projects:
A. Oil & Gas Sector
|Title: |LOBS HPCL, Mumbai - Detail Engineering |
|Owner: |Hindustan Petroleum Corporation Ltd (HPCL), Mumbai. |
|PMC: |Jacobs |
| | |
|Licensor: |Exxon Mobil (EMRE) |
|Project details |Capacity of 200,000 MTPA. Facilities - Raffinate |
| |Hydrotreating Unit, Mobil Selective Dewaxing Unit, |
| |Hydrofinishing Unit |
| | |
| | |
|Highlights: |Worked as the Piping Materials Engineering Specialist for |
| |this project. Proficiently handled all the work pertaining|
| |to piping materials. |
| |Deftly handled a team of 3 members for carrying out the |
| |piping materials job for this project, while taking the |
| |full responsibility of materials section. |
| |The PMS had 62 pipe classes with high pressure piping of |
| |2500# & 1500# and materials like CS, SS (304, 316, |
| |321,347H), Duplex SS, AS (P11, P22). |
| |Carried out extensive calculations for bolt tensioning & |
| |torque wrenching, with exhaustive meetings with tensioning|
| |vendors to select the bolt tensioning equipments. |
| |For the first time introduced compact steam trapping |
| |assembly to replace the conventional steam trap with |
| |associated valve arrangements. It reduced cost, time & |
| |site construction work. I was solely responsible for |
| |finalizing its details with vendors. |
|Title: |Reactor & Regenerator (R-R) section of INDMAX FCC Unit, |
| |Paradip Refinery- Detail Engineering & Proposal |
| |Engineering |
|Owner: |Indian Oil Corporation Limited (IOCL) |
|PMC / MPMC: |Toyo Engineering Corporation, Japan / Foster Wheeler |
|Project details: |Paradip Refinery has a capacity of 15,000,000 MMTPA. FCC |
| |(Fluidized Catalytic Cracker) Reactor Regenerator Project |
| |for converting heavy distillate and residue into LPG/light|
| |distillate. It is the largest FCC unit in terms of |
| |capacity and complexity among the PSU refineries in India.|
|Licensor: |CB&I Lummus Technology |
| | |
|Highlights: |Worked as the Materials engineer in the detailed |
| |engineering and proposal stages of the project. |
| |Prepared PMS which included critical lines with refractory|
| |lining, high temperature fluid services (788 deg. C) and |
| |very large pipe sizes of the order of 158''. |
| |Carried out all the other design activities as listed out |
| |in the above project. |
| |Also worked in the proposal bidding stage of the project &|
| |contributed in securing the detailed engineering design of|
| |this project. |
| | |
|Title: |BA Energy Heartland Upgrader Project - Detail Engineering |
|Owner: |Value Creation Group, BA Energy |
|Location: |Calgary, Canada |
|PMC: |Jacobs |
|Highlights: |Extensively worked in the Piping Layout group |
| |Looked after the Pipe Rack Load data |
| |Coordinated between the layout and stress group |
B. Fertilizer Sector
|Title: |Ammonia Plant Feed Stock Changeover Project - Detail |
| |Engineering |
|Owner: |National Fertilizers Limited (NFL) |
|PMC: |Projects & Development India Limited (PDIL) |
|Licensor: |Haldor Topsoe, Denmark |
|Highlights: |Exposure to piping in fertilizer projects. |
| |Prepared specifications & performing calculations for |
| |high pressure and high temperature piping. |
| |Performed all the materials related activities for the |
| |project. |
[pic]
EDUCATIONAL AND PROFESSIONAL CREDENTIALS
B.Tech (Mechanical Engineering) 2007 ( NIT, Srinagar ( CGP: 7.74
CLASS XII, 2002 ( J&K Board of School Education ( 75.33
CLASS X, 2000 ( J&K Board of School Education ( 78.2
Certifications:
Successfully completed certificate course in Project Management from IIT,
Delhi
Soft Skills:
|CAD: |Bentley Micro station (Working knowledge) |
|Plant Review |Smart Plant Review, Navis Works (Working knowledge) |
|Software: | |
|OS: |Windows, Linux |
|Miscellaneous: |MS Office, Excel (Expert) |
[pic]
EXTRACURRICULAR ACCOLADES
. Active member of the American Society of Mechanical Engineers (ASME).
. Member of the Cricket team at school, college and corporate levels
. Play tennis, squash, bowling & cricket.
[pic]
Date of Birth: 13 June 1984
Linguistic Proficiency: English, Hindi, Urdu, Kashmiri and Arabic
(Elementary Stage)
Hobbies: Traveling, Sports, Movies.
References: Available on request
|
