| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidate Candidate's Name
Street Address Crestmont Drive
Lock Haven, Pa. Street Address
(Home): PHONE NUMBER AVAILABLE
(Cell): PHONE NUMBER AVAILABLE
Professional Summary:
Over 15 years experience in the design, testing and troubleshoot of electronic systems and sub
assemblies. Provided primary engineering resource for environmental testing chambers for over 7 years.
This included full ownership of equipment operation, scheduling maintenance, automated test
development and or PLC programming.
I have developed assemblies and fixtures for sub-assembly test and characterization to full system
test fixtures. I have provided solutions for MRB Root Cause Analysis, obsolescence issues, legacy design
problems and have had highly active roles in R&D and new product development.
I have a broad range of experience which includes: circuit design and PCB layout (ECAD),
mechanical design (AutoCAD LT), operation of most machine shop equipment, welding, braising and
outstanding soldering skills. I have worked with voltages ranging from low level digital data, high power
RF, high voltage DC >100kV and up to 480VAC/600A main power feeds.
I have been responsible for capitol equipment recommendations, purchase and installation both
personally and thru support crew supervision of values >$1M.
Skills:
LabVIEW Project Management
Analog/Digital circuit design Troubleshoot
Schematic Capture and PCB Design Documentation
Mechanical CAD (AutoCAD LT) Training
System Design Instrumentation
Employment:
6/14 1/16:
Lead Electrical Engineer
Drucker Diagnostics, Port Matilda/Phillipsburg Pa.
Responsibilities:
Management and technical input with respect to the design and application of
electronic/electrical/electro-mechanical components and sub-assemblies. Developed test strategies and
provided data analysis of new circuit designs at sub-assembly and system level. Worked with Quality to
develop testing strategies and procedures for validation and quality assurance. Responsible for design,
development and life cycle management of PCBs, motors, actuators, power supplies, cables and wiring,
and other electrical/electronic components. Provided Root Cause Analysis and Corrective Actions to MRB
1
Candidate's Name
175 Crestmont Drive
Lock Haven, Pa. 17745
(Home): PHONE NUMBER AVAILABLE
(Cell): PHONE NUMBER AVAILABLE
with respect to PCBAs and electrical components. Participated in Design Review meetings providing input
and recommendations with respect to R&D design efforts.
Accomplishments:
Saved $1+ million contract by designing a drop in daughter board (PCB) to replace a
component obsolescence issue No PCB re-spin required, completely backward
compatible.
Solved and corrected a long standing product operational issue improving quality and
operation of $1+ million sales contract thru BOM changes No PCB re-spin required.
Corrected serious ground plane issues improving operational performance of $1 million
product line.
Specified test strategy, coordinated off-site testing and analyzed data for environmental
testing of $1+ million product line for compliance validation.
Utilized environmental test data to assure product compliance and provided
recommendations for product improvement and cost reductions.
Developed, tested and validated design modifications requested by NASA for product
deployment to and installation on the International Space Station (ISS).
1/14 6/14:
Aerotech staffing
Contract Manufacturing Engineer to Drucker Diagnostics, Port Matilda/Phillipsburg Pa.
Responsibilities:
Provided technical guidance and recommendations for production and test of company products.
Investigated areas for improvement to reduce required man hours, improve quality and reduce cost.
Accomplishments:
Resolved DC Power Supply issue resulting in uninterrupted production schedule of $ 1+
million product line.
Corrected nagging FET actuator drive circuit problem resulting in improved performance
and reliability of product line. Solution was achieved thru BOM changes and without any
major PCB redesign.
4/07- 1/4/13:
Test Engineer/Manufacturing Engineer
General Dynamics SATCOM, State College, Pa.
Responsibilities:
2
Candidate's Name
175 Crestmont Drive
Lock Haven, Pa. 17745
(Home): PHONE NUMBER AVAILABLE
(Cell): PHONE NUMBER AVAILABLE
Provide engineering support for the design, development, documentation and integration of test
systems for new and existing microwave product. Provide the design, development and documentation of
sense and control circuits, schematics and related PCB assemblies. Generate and provide related
documentation per project and build. Provide strategies, recommendations and implementation of ESS
testing plans. Provide primary engineering resource for the design, development, documentation a nd
integration of hardware and software for ESS programs.
Accomplishments:
Coordinated with the riggers and supervised the removal, transportation and installation of
all environmental test chambers into the company's current location.
Designed and constructed automated test system for redundant LNA switching control
device. Provided all schematics and mechanical drawings. Generated LabVIEW software
code for automated operation. Created Theory of Operation manual in addition to
providing system operational training.
Defined and managed the installation of a $1+ million multi-axis random vibration and
environmental chamber.
Designed and constructed all aspects of test, HMI interface and sense and control systems
used in the environmental testing of high power SSPA RF transmitter and associated DC
power supplies.
Generated LabVIEW software executable for automated environmental testing of SSPA RF
transmitter and associated DC power supplies.
Generated several additional automated test programs and software utilities in LabVIEW.
8/00 4/07:
Electronics Engineer
L3 Communications Williamsport, Pa.
Responsibilities:
Design, develop and integrate new test systems and sub-assemblies.
Design, develop and document various circuits, schematics and related PCB assemblies.
Compile, correlate and manage all relative documentation per project and build.
Design and investigate improvements to existing equipment and generate related
documentation.
Provide maintenance of, and develop corrective action plans for, existing test equipment and
various production related equipment.
Assist in the supervision of the technical staff, give guidance and advise other members of the
engineering staff and technical team as needed.
3
Candidate's Name
175 Crestmont Drive
Lock Haven, Pa. 17745
(Home): PHONE NUMBER AVAILABLE
(Cell): PHONE NUMBER AVAILABLE
6/97- 8/00:
Test/Test Development Technician
Primus Technology Corp., Williamsport, Pa.
Responsibilities:
Assist in the design of new functional PCB test fixtures, PCB interfaces, ICT and MDA test
beds.
Construction, debug, and implementation of new test fixtures.
Maintain and improve upon existing test fixtures and interfaces.
Test and troubleshoot of production run and prototype PCB assemblies.
6/91-11/93:
Assembler/ Welder
Lunaire Corporation- Gruenburg Oven Division, Williamsport, Pa.
Responsibilities:
Construction of industrial ovens, environmental chambers and conveyor systems.
Utilize various types of shop equipment and machines required to complete unit from frame-
up to final assembly.
Education:
9/96-12/98- Bachelor Degree of Science-Electronic Technology
Pennsylvania College of Technology, Williamsport, Pa.
5/94-5/96- Associate of Applied Science-Electronic Technology
Pennsylvania College of Technology, Williamsport, Pa.
(Communication Emphasis-Fiber Optics)
References Available Upon Request
4
|
