| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name M.Eng EMAIL AVAILABLE; Cell#+1(416)706-
Street Address
Senior Electrical Engineer registered Professional Engineer (P.Eng & PEGNL)
engineering practice in different industries including Mining, Oil and Gas, Refineries, and
Water Treatment Plantst, EPCM projects experience in industrial Projects, Power
distribution, Power Generation, Renewable Energy, Discipline Technical Specialist to
initiate and execute power system studies. On site management, commissioning &
Start up, Commissioning, testing and inspection process in variety of projects mainly
energy project, material handling system, Mining, overhead lines (T&D), Transformers,
Switchgears, and substations, experience with Arc Flash Labeling and Electrical Safety
Program.
Qualifications:
MSEE Master Degree Electrical Engineer (Power) from University of Waterloo and
License Professional Engineer and PMI member
15 plus years relevant experience as Lead Electrical in consultant firm for factory
plants or utility environment and 10 years as Project Engineer responsible for
delivery design and construction packages.
Proficiency in Power Systems Software and programs, such as ETAP, SKM, Easy
Power, and EDSA. Recent projects utilizing ETAP for Short Circuit Calculation, Load
Flow study, Arc Flash and Harmonic Study, Transient and stability study, Motor
Starting, and overcurrent protective device coordination, and review of power quality
and reliability.
Designed electrical systems, developed Single Line Diagrams, Prepared Load List,
preformed voltage drop calculation, expert in power system analysis, short circuit
calculation and protective device and coordination studies.
Prepared detailed design drawings including: Schematics, Protection & Control
,Layouts (Equipment, Cabling, Cable Tray, Grounding, Lighting),Single and three line
diagrams, Interconnection wiring diagrams),Communication block diagrams
Strong understanding of project management principles
Experience developing the I&C design on P&ID s.
Experience working in Hazardous area Material and Installation of Electrical
equipment (explosion proof) for Hazardous area.
Experience with Direct Digital Control (DDC), and Programmable Logic Controllers
(PLC), DCS, and SCADA system.
Preformed working with multi discipline project teams, poses leadership skills to
develop engineering team
1
Candidate's Name M.Eng EMAIL AVAILABLE; Cell#+1(416)706-
4234
Demonstrate thorough knowledge and understanding of NEC, NFPA 70E,CSA, IEC
and IEEE standards necessary to design Electrical system
EXPERIENCE
2011 2016 Hatch, Mississauga, Ontario, Canada
Senior Electrical Engineer
Discipline lead responsible to prepare electrical design, calculation, system study,
multi discipline coordination, Perform quality reviews of project deliverables..
2
Candidate's Name M.Eng EMAIL AVAILABLE; Cell#+1(416)706-
4234
Vale Long Harbour Processing Plant: Discipline lead Engineer responsible to
prepare electrical design, calculation, system study, and multi discipline
coordination. Provided technical input for P&ID s, Electrical, Mechanical, System and
Process Control, Piping, and input to Value Engineering Improvements (VEI).
Ontario Power Generation (OPG), Darlington Project, Ontario, Canada: Electrical
Engineer specialist: Reviewed work by Sargent & Lundy engineers and commented
on drawing/documents to ensure technical accuracy and Stamped drawings and
documents.
Kinross, Tasiast Gold mine, Senior Electrical Engineer: Responsible for electrical
design, Calculation, Studies, Designed, supervised construction, and commissioned
22 km of 33 KV Overhead Line, 33 KV/11 KV, and 33 KV/6 KV Substations,
Switchgears, and interconnection to 6.6 KV and 11 KV system existing systems.
Prepared relay coordination and setting, commissioned and energized 33 kV
overhead line.
Prepared ETAP modeling for Electrical Network Load flow, Short circuit, Protection &
Control. Prepared technical specifications, Equipment data sheets, Single Line
Diagrams, and Bill of Materials.
Site visit, Analysis of existing system and prepared modification to brown field to
upgrade the system to accommodate new loads. Prepared protection and metering
Single Line Diagrams.
Support field construction & commissioning for overhead line and substations 33 KV,
20 KV, 15 KV, 13.8 kV, 11 kV, 6.6 kV, 4.16 kV
Barrick, Peru, Lagunas Norte PFS project: Electrical Engineer Discipline lead for
electrical design, coordination and checking of required equipment and component
drawings for budget inquiry.
Air Liquide, Huston Texas: Electrical Site Engineer, On site management,
commissioning & Start up, Commissioning, testing and inspection
2006 2011 SNC LAVALIN INC., Toronto, Ontario, Canada
Senior Electrical Engineer
Accountable for meeting budget, schedule commitments and deadlines for Electrical
design on the project. Discipline Technical Specialist, Designed, and supervised
electrical team.
3
Candidate's Name M.Eng EMAIL AVAILABLE; Cell#+1(416)706-
4234
SNC Nuclear, Hydro Quebec, Gentilly2 Power Plant Project, Quebec Canada:
Electrical Engineer specialist: Prepared electrical system protection philosophy,
ETAP modeling for Electrical Network, Load flow and short circuit calculation, Motor
starting analysis, Protective Relay coordination.
Plasco Energy Group INC., Plasco Central Alberta: Waste Conversion Facility:
Electrical Engineer Specialist: Prepared ETAP modeling for Electrical Network, Load
flow and short circuit calculation, Motor starting analysis, Harmonics study,
Protective Relay coordination, and Arc Flash study. Prepared technical specification
and Equipment data sheets.
MOL Makori Gas Process Facility, Pakistan: Lead Electrical Engineer: Team Leader
for Electrical work activity, Designed and prepared electrical system protection
philosophy, Load flow, short circuit, Motor starting, and Harmonics study. Prepared
technical specifications, Equipment data sheets, Single Line Diagrams, Schematics
and Bill of Materials.
Saskpower, Saskatchewan Canada: Electrical Engineer Specialist: Prepared
electrical system protection philosophy, ETAP modeling for Electrical Network, Load
flow and short circuit calculation, Motor starting analysis, Harmonics study,
Protective Relay coordination, and Arc Flash study. Prepared technical specification
and Equipment data sheets.
Valero Benicia Refinery, California, USA Electrical Engineer Specialist: Prepared
Technical Specifications and Equipment Data Sheet for Power Transformers, MV
VFD s, MV MCCs, and MV Switchgears. Prepared RFI s, Vendors bid evaluation,
RFP s, Designed and prepared Schematic drawings, ETAP modeling for Electrical
Network, Load flow and short circuit calculation, Motor starting Calculation,
Protective Relay Coordination, and Arc Flash study.
NAC/SAC Radford Modernization, Radford, Virginia, USA Lead Electrical Engineer:
Prepared budget estimates, Designed and prepared Single Line Diagrams(SLD),
Cable Schedules, Schematic Diagrams, Lighting, SKM modeling for Electrical
Network, Load Flow and short circuit calculation, Relay coordination, Arc Flash
study, and grounding system calculation.
BIOX Hamilton Startup Mods, Hamilton, Ontario, Canada : Lead Electrical Engineer
designed and prepared single line diagrams, cable schedules, schematic diagrams,
Instrument and control drawings, heat tracing, Lightning protection, and prepared
specification
4
Candidate's Name M.Eng EMAIL AVAILABLE; Cell#+1(416)706-
4234
2004 2006 Ausenco/Sandwell CONSULTING ENGINEERS LTD, Burlington, Ontario
Senior Electrical Engineer
Ford Motor Company 10 MW Peak Shaving Power Plant, Oakville Ontario, Canada:
Designed and Prepared single line diagrams, power and control layout drawings,
Substation Design and protective relay Coordination, cable trays and conduit layout
drawings, lighting and grounding layout drawings, control schematics, wiring
diagrams, cable and conduit schedules, short circuit study and electrical
specifications.
General Motors Air Make Up System, St. Catharine s, Ontario, Canada: Designed
electrical system. Prepared power and control schematics and wiring diagrams,
technical specification, bill of materials, and cable and conduit block diagrams.
Conducted site work, analyzed existing systems, prepared upgrade system,
designed lightings.
Toronto Hydro Cogeneration Project, Toronto, Ontario, Canada: Designed single line
diagram and prepared protection system philosophy. Designed and sized the
grounding transformer.
2002 2004 McViro Environmental consultant, Thornhill, Ontario
Electrical Engineer/Instrumentation and Control Engineer
Humber Water Treatment plan: Toronto, Ontario, Canada: Developed the I&C design on
P&ID s. Experienced developing/designing control panels which house
DDC/PLC/DCS systems.
Designed SCADA network block diagrams, Designs control panel layouts
Developed control strategies, Selects instrumentation
Prepared specifications for instruments, computers, networking equipment, PLCs
and associated components
Practiced working in Hazardous area Material and Installation of Electrical
equipment (explosion proof) for Hazardous area.
2001 2002 ELECTRICAL CONTRACTORS COMPANY, Thornhill, Ontario
Electrical Contractor/ Electrical Lead Expert/Project Manager
High Voltage and Low Voltage works, Design, Supply, Installation, Testing and Commissioning.
5
Candidate's Name M.Eng EMAIL AVAILABLE; Cell#+1(416)706-
4234
Design, Supply, Testing and Commissioning of switchgear, MCC,s for sub stations
Installation and termination of Transformers, DG sets
1996 2000 TAKESTAN ENGINEERING: Electrical Lead Engineer
Managed multidiscipline engineering team, Ensured quality control by troubleshooting, and
resolving technical problems. Designed and built automation panel with programmable logic
controller (PLC) and PC as human machine interface (HMI) for batch plant/ glass recycling.
Calculated and designed electrical network, and power substation. Designed and prepared
electrical distribution drawings, lighting and emergency systems. Designed and built control
panel for glass furnace using PLC and P&ID controllers. Commissioned glass furnace control
system and production machines. Installed and tested operation and performance of all
electrical machinery. Scheduled tasks, deadlines and milestones for all stakeholders and
resources. Implemented and manage critical paths/milestones and monitoring mechanisms for
the project.
1992 1996 RAZI PHARMACEUTICAL GLASS FACTORY, Takestan, Zanjan
Senior Electrical Engineer
Installed and maintained power substation, power switchgears, medium/low voltage,
20 kV electrical distribution and 220/380 V secondary distribution system.
Implemented electrical power grids and commissioned control system. Troubleshot
electrical and electronic systems. Installed and overhauled turbo generators and air
compressors. Developed maintenance and operating standards for electrical and
electronic systems.
Experienced Direct Digital Control (DDC system), and Programmable Logic
Controllers (PLC).
PROFESSIONAL DEVELOPEMENT
2014 Master of Electrical Engineering (MEE Power) University of Waterloo
2009 ETAP: Advance Course, Edmonton, Alberta, Canada
2008 ETAP: Load Flow Calculation, Short Circuit, Motor starting, Arc Flash
Study, Toronto, Ontario, Canada
2007 Power Tools for window, SKM Software, SKM System Analysis Inc.,
2007 IEEE Power System Application, IEEE Power Engineer Society
(PES), Toronto, Ontario, Canada
2007 Micro station, City College, Toronto, Ontario, Canada
6
Candidate's Name M.Eng EMAIL AVAILABLE; Cell#+1(416)706-
4234
2006 Professional Engineer PEO
2004 Canadian Electrical Code and Ontario OH&S Act & Regulation,
George Brown College, Toronto, Ontario, Canada
2004 Technology report writing, OACETT, Mississauga, Ontario, Canada
2003 Robotic System, Centennial College, Scarborough, Ontario, Canada
2002 AutoCAD, York dale S.S.A.L.C., Toronto, Ontario, Canada
1997 VLAN and Servomechanism, Emhart Glass Co, Sundsvall, Sweden
Siemens PLC S7 and S5 Programming, at Siemens
1996
1988 BSc. Electrical Engineering (EE Power) University of Tabriz
COMPUTER APPLICATION
ETAP, SKM, Easy power, MS Project, AutoCAD, Micro Station, MS Office,
Power Point, Excel
PROFESSIONAL ASSOCIATIONS
Professional Engineers Ontario, P.Eng. Registration No: 100098481 since 2006
Project Management Institute (PMI) member, PMI ID#3229252 since 2008
Certified Engineering Technologist, OACETT No: 823083 since 2004
ESA Master Electrician License #6006979 and Contractor License
7
|
