| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidate EMAIL AVAILABLE
Candidate's Name Dell Sanders
Candidate's Name Dell Sanders
Street Address Notre Dame
Albany, GA Street Address US
Mobile: PHONE NUMBER AVAILABLE
Day Phone: PHONE NUMBER AVAILABLE
Email: EMAIL AVAILABLE
Objective
My goal is to obtain a job as a mechanic doing what I enjoy and what I am good at.
Experience
11/2008-Present
URS Contractor (Marine Corps Logistics Base) Albany, Ga.
Mechanic
I disassemble, make repairs apply modifications, assemble and perform other similar duties in the repair of a
variety of heavy mobile equipment such as bulldozers, cranes, HMMWV, Landing Assault Vehicles (LAV),
AAV, tractors, and trucks. I use a variety of hand tools and power tools such as pneumatic impact wrenches
and drills to affect disassembly and assembly of equipment, repairs, adjustments and modifications in
accordance with established procedures.
I inspect parts for wear against set specifications; reclaims used parts for reuse or replaces with new parts,
rework brakes, chassis components, axles, wheels, and drive shafts. I install major components and effects
interconnections of control lines, cables, and wiring. I perform tune-ups, adjustment of linkage, timing and
servicing of equipment. I work independently using a variety of common test and measuring instruments
such as timing lights, dwell meters, feeler gauges, compressions test gauges, test lights, multi-meters in
adjusting, tuning, trouble shooting and repairing equipment.
Remove rust by use of portable electric and pneumatic sanders, impact tools, sanding by hand, scraping with
hand scrapers and chemical application. I remove contaminants such as road dirt, mud and grease by steam
cleaning and approved solvents. I preserve unit after process by changing fluids, applying tape, strippable
coatings, oils, grease, preservative compounds and paint surfaces after cleaning process by spraying,
brushing, wiping, fogging, and dipping.
I perform depot level maintenance on heavy mobile equipment. I inspect, disassemble, repair, rebuild,
modify, test and adjust engine accessories and various components such as: hydraulic, cooling,
electrical and mechanical systems, fuel tanks, drive shafts, vent ducts, and more to the exact
specifications as stated in the technical manual.
I utilized special tools and machinery such as impact wrenches, special pullers, arbor presses, blast
cleaner, drills, pressure gauges, micrometers and more to remove components for inspection to
determine if the extent of wear is within the acceptable tolerances for reuse or properly discard those
worn beyond limitation. I utilized a systematic approach to diagnose the problem, and independent
judgment to determine the degree of disassembly required in order to maintain the minimum expense
while maintaining or exceeding the standard of quality.
2/2006-11/2008
Defense Services Support (DS2) MCLB Albany, Ga.
EMAIL AVAILABLE
Candidate's Name Dell Sanders
Mechanic
In this position, my duties include disassembling, assembling, fabricating, modifying, and rebuilding, and
inspecting component parts for the combat vehicles such as AAV's, and LAV's. I determined repairs
necessary to return vehicle to proper operating condition, in a timely manner.
I diagnose, repair, overhaul and modify heavy mobile equipment, systems and vehicles with a through
working knowledge of the mechanical make up, operation, and working relationships of heavy duty systems,
assemblies, and parts (also major systems such as diesel and gasoline engines, automatic and manual
transmissions and gear reduction systems and accessories. I have electronic, electrical, hydraulic and
pneumatic knowledge of the systems of the vehicles that I work. I use hydraulic lifters, loaders, turners and
positioning systems along with the controls for each. I trace and locate defects involving hydraulic and other
major system failures. I determine the extent of repairs necessary by visual, auditory examinations and the
use of a variety of test equipment available. I have skill using measuring devices for fitting and installing
components such as pistons, valves, bearings, gears, cylinders, etc. to specified clearances. I use
independent judgment and make decisions within the framework of accepted trade practices and oral/ written
instructions by the supervisor. Vehicles records along I decide the work methods and tools to use for various
assignments. I work with minimal supervisory and / or leader assistance during and upon completion of my
assignments. During the performance of my duties, I use various tools and equipment such as; drills (electric
or pneumatic), pulleys, wrenches, torque wrenches, etc.
To perform duties, I work from oral instruction, blueprints, sketches schematics, engineering instructions,
work instructions, statement of work, and technical directives/manuals. I wear the required and proper
personal protective equipment (PPE) at all times during the work shift. I maintain a safe and clean work area.
I kneel, bend, stoop and perform duties in awkward positions; I am able to push, lift, or carry heavy tools
equipment for a reasonable amount of time.
I operate a wide variety of heavy mobile equipment to determine what repairs adjustments and
modifications are required. I operate MHE as required and perform preventive maintenance on
equipment.
I perform depot level maintenance at a journeymans level on heavy mobile equipment. I inspect,
disassemble, repair, rebuild, modify, test and adjust engine accessories and various components such
as: hydraulic, cooling, electrical and mechanical systems, fuel tanks, drive shafts, vent ducts, and more
to the exact specifications as stated in the technical manual.
11/2004-8/2005
Equity Group Camilla,Ga.
Maintenance Mechanic
Constructed, erected, installed and repaired wire belt and motors on production line.
Studied blueprints, sketches and building plans for information pertaining to type of material required.
Assembled, installed and repaired pipes, fittings and fixtures of heating, water and drainage systems.
Studied building plans and working drawings to determine work aids required and sequence of installations.
Inspected structure for obstructions to be avoided to prevent weakening of structure after installation of pipe.
Located and marked position of pipe and pipe connections and passage holes for pipes in walls and floors.
Planned layout, installed and repaired wiring, electrical fixtures, apparatuses and control equipment. Planned
new and modified installations to minimize waste of materials, provide access for future maintenance and
avoid unsightly, hazardous and unreliable wiring, consistent with specifications and local electrical codes.
Prepared sketches showing location of wiring and equipment, and followed diagrams and blueprints,
ensuring that concealed wiring was installed before completion of future walls, ceilings and flooring.
Job Related Training
Hand Tool Safety on Industrial Maintenance, 02/2010;
Asbestos Awareness Training Lead Based Paint Awareness Training Hazardous Waste Awareness Training
(40 CFR 265.16), 01/2010;
AT Level 1 Awareness Training, 12/2009;
EMAIL AVAILABLE
Candidate's Name Dell Sanders
USMC Annual Security Training Counter-Espionage Awareness, 12/2009;
USMC Annual Security Training Anti-Terrorism and Force Protection, 12/2009,
USMC Annual Security Training Basic Information and Personnel Security, 12/2009;
DOD Information Assurance Awareness, 3/2009,
Personally Identifiable Information Version 1.0, 3/2009,
Personally Identifiable Information Version 1.0, 10/2009; Personally Identifiable Information Version 8.0,
10/2009
Education
Mitchell Baker High School Camilla, Ga. Some high school coursework completed.
References
Name Employer Phone
Oscar Jackson Proctor & Gamble PHONE NUMBER AVAILABLE
Nolen Newberry (*) MCLB Albany PHONE NUMBER AVAILABLE
Katie Haynes Mitchell County Board of PHONE NUMBER AVAILABLE
Education
|
