| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateCandidate's Name
Street Address Nagle Street, Mobile: PHONE NUMBER AVAILABLE
Apt #Street Address . Email: EMAIL AVAILABLE
OBJECTIVE
Seeking an internship for summer 2017 in the field of Mechanical engineering
EDUCATION
Master of Science in Mechanical Engineering Aug 2016-May 2018
Texas A&M University, College Station Texas, USA. Overall GPA: 3.0/4.0
Bachelor of Engineering in Mechanical Engineering Sept 2009-May 2013
Siddaganga Institute of Technology, Tumkur, Karnataka, India. Overall GPA: 9.12/10
EXPERIENCE
Student Worker, ETID, Texas A&M University, College Station, USA Dec 2016- Present
 Prepared ceramic and metal powder of grain size 50 μm by Phase Inversion Technique and studied the mechanical property of the parts manufactured using the powder as a part of the research under the supervision of Dr Chao Ma.
 Gained hands on experience on the state of the art Renishaw AM 400 Additive Manufacturing machine to produce parts which will be ultimately used for the joint arthroplasty after several rounds of testing and validation.
Design Engineer, Quest Global Engineering Services, Bangalore, India May 2014-Aug 2015
Design and Detailing of Drill Collars
 Developed manufacturing drawings of singular Parts, Sub-assemblies & General assemblies of Measuring While Drilling/Logging While Drilling Tools using software packages like Solid Works and AutoCAD.
 Was a part of cross functional teams which proposed and implemented design changes in the Drill Collars according to the RTA(Request for Technical Assistance) provided by the customer.
 As a part of Life Cycle Project Coordinating Team documented repeated problems which occurred during detailing and drafting complex drill tool parts to improve efficiency.
Design Optimization of Civil Aircraft Engines  Independently implemented design changes to implement cost reduction initiatives for the Rolls Royce Engine Development program, by suggesting a validation strategy and substantiating them for the required Airworthiness specifications.  Have been a part of 2 Six-Sigma Projects for reduction in cycle time for creating bill of material of a production engine, which in-turn brought a cost saving of 12,000 per engine to Rolls-Royce.
Manufacturing Engineer, FiveBros Forgings Pvt. Ltd., Ankleshwar, India Jun 2013-May 2014
Quality Control and Inspection
 Gained hands-on experience in conventional forging and heat treatment of flanges and precision manufacturing techniques.
 Led the Quality control team which was responsible for conducting Destructive tests such as Hardness tests, Impact test as well as Non Destructive tests such as Magnetic Particle Inspection (MPI) and Liquid Penetrate test.
ACADEMIC PROJECTS
 Design and Analysis of a Cogeneration System for a Supermarket, Texas A&M University, Dec 2016
 Proposed and designed a Cogeneration Power Plant facility to replace the current conventional system to supply the annual electrical and thermal demands of a Supermarket facility.
 Completed the economic analysis of the Cogeneration plant to calculate the monetary savings generated by using the Cogeneration system as opposed to a Conventional system.
 Design and Fabrication of a Hybrid Moped, Siddaganga Institute of Technology, May 2013
 Designed and fabricated a Hybrid Moped which consisted of a Gasoline engine as well as a 200 RPM DC electric motor which helped increase the mileage of the moped from 95 Miles/gallon to 152.7 Miles/gallon while decreasing the amount of harmful emissions.
ACTIVITIES ● Runners-up at IMPROMPTU design contest held at Quest Global.
● Volunteered at MITRA JYOTHI an NGO for the visually impaired.
● Presented a paper on Pareto s Principle in the National technical Symposium held at Siddaganga Institute of Technology, India.
COMPUTER SKILLS
C++ Programming MATLAB ANSYS AutoCAD Engineering Equation Solver (F-Chart)
Microsoft office Solid Works CATIA Product Data Management (Cape Web Interface) |
