| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidateA dynamic professional with over 8 years of rich experience in Quality Assurance, Quality
Control, welding process, Process Enhancements and Man Management & Vendor Inspection &
Auditing.
&#Street Address ; Gained exposure in fields like structural fabrication & Oil & Gas, Petrochemical / Refineries
including from engineering Phase to Commissioning phase for all the activities.
&#Street Address ; Adept in handling quality related activities involving resource planning, in - process inspection
and coordination with internal departments.
 Proficient in the implementation of various techniques for improving the operational efficiency
and achieving cost savings.
 Familiar and understand drawings in GI,FD, GA, ISO, P&ID and Plot plan etc.,
 Expertise in designing world class systems and implementing various projects that will enable
organization to consistently meet and enhance customer satisfaction.
 An effective communicator with excellent relationship management skills and strong analytical,
problem solving & organizational abilities.
 Successfully carried out assessment of contractor s quality system, preparation of MDR, QP, ITP,
WPS, PQR & WQT. (Inspection in Mechanical, Welding, Piping, Structures, Plumbing, HVAC
activities etc.,)
 Effectively coordinated with various Inspection Agencies for Inspection activities.
 Possess excellent knowledge of related International standards and codes.
Familiar codes and standards:
 ASME, API, AWS, ASTM, ANSI, ISO etc.,
Inspection
 Welding. Non Destructive Testing.
 Piping and Pipeline .Hydro test & Pneumatic Testing.
 Structure Fabrication, Erection.
 Mechanical (Pumps, Equipment) Alignment, Erection and Installation.
 Storage Tanks, Positive Material Identification (PMI).
 RTR Piping, Plumbing HVAC Installation, Fire Proofing Installation.
Employment History
Sep 2014 TILL DATE- German steel contracting L.L.C,
U.A.E
(QA/QC ENGINEER / WELDING INSPECTOR)
 Aug 2008- Sep 2014 - PARASAKTHI ENGINEERING WORKS, PUDUKUDI,
INDIA.
(QA/QC ENGINEER/ WELDING INSPECTOR)
TECHNICAL EDUCATION
 Certified Welding Inspector AWS.(certificate number : 16103131)
 Certified in ASNT Level II as per the American society.
1. Ultrasonic Testing.
2. Liquid Penetrate Testing.
3. Magnetic particle Testing.
4. Radiographic Testing.
5. Magnetic flux leakage testing.
 WELDING ENGINEERING AT INDIAN WELDING SOCIETY
Main Projects
German steel contracting L.L.C, -U.A.E
(QA/QC ENGINEER / WELDING INSPECTOR)
Receipt inspection: Materials like, plates, pipes, nozzle forgings , forged shells , fittings , structural
items of various profiles as per various standards , beam , column , stiffeners , wings plates, bolts , nuts
, fasteners, gaskets ,etc. with respect to approved purchase order , client specification , approved
drawings , applicable code & standards. Also maintaining record of materials used for construction.
Inspection Planning: Preparation of QA / QC plan in line with specification and code / standard
requirements and obtain customer / client approval for their Hold, Witness or surveillance check
points, Preparation of seam wise and assembly wise checklist to maintain better track of the job
progress. Preparation of detailed inspection procedures, etc.
Welding: Conduct the qualification of welder as per ASME sec IX & AWSD1.1 maintain the record of
welder qualification test.
In-process inspection: Steel structure & piping, dimension, fit-up, welding.
 Developing the Organization Chat, Project Quality Plan, ITP s, QA/QC Procedures, Welding Book,
WPS, PQR, Welder Qualification Records & MDR.
 Monitors sub-contractors and supplier s workmanship, installation of material and equipment for
quality control compliance.
 Every day to participate in construction meeting to analysis the production and quality issues.
 Involved in the preparation of pWPS and qualification of PQR, WPS. Such as: GTAW, SMAW,FCAW
and SAW .
 Verifying the budget of engineering welding activities, welding cycle time, quantity of welding
consumables.
 Manage the implementation of approved Quality Plan, ITP, Inspection and Test Procedure to execute
during Yard fabrication and attend all witness and hold points during inspection/testing activities.
 Provide all necessary coaching and support to client project QA/QC inspectors to ensure that all
inspection and testing activities with Hold and Witness Points are attended any issues arising are
resolved expediently and efficiently.
 Issue and follow up on Non Conformance Repots (NCR), Corrective Action Request (CARs) and
Preventive Action Requests (PARs) raised as a result of monitoring and sub-contractors activities.
 Coordinate with client for inspection activities issued RFI for witness/hold point etc.,
 Review contract documents to ensure identification and comprehension of quality requirements.
 Coordinate with the discipline to ensure corrective action on the above thereby ensuring the closure of
NC s raised.
 Liaise with the Engineering Manager for the resolution of construction requests for clarification, site
queries and non-conformances.
Participated in Group discussion to resolve the project discrepancies as per the code and standard.
 Report any major quality issues to Quality Manager of the project Management Team.
 Preparation of welder repair rate for the project and analysis of repair.
Non Destructive Testing:
 Radiographic testing planning & arrangement, film interpretation.
 Ultrasonic thickness measurement of base metal & weld scanning.
 Dye penetrates testing.
 Magnetic particle testing.
 MFL floor map & Hand scan testing.
Mechanical & Destructive Testing:
 Hardness testing of Base metal and weld (in sit by equotip).
 Impact Toughness Test.
 Tensile Strength Test.
 Bend Test.
 Fracture Test.
 Microscopic Testing.
 Nick Break.
Heat Treatment: Approval & Monitoring of heat treatment of vessels and part of vessel (including
attachment of thermocouples & review of charts).
Achievements:
 Conversant with various international codes and standards such as ASME ,AWS ,API ,BSEN, ISO
,ANSI ,ASTM ,etc,,
 Conversant with various welding processes such as SMAW, GTAW, SAW, and FCAW
PARASAKTHI ENGINEERING WORKS, INDIA
(QA/QC ENGINEER/WELDING INSPECTOR)
Working as QA/QC ENGINEER /WELDING INSPECTOR on Steel Structural
pipe installation, stringing, laying, welding, NDE, testing, mechanical clearance & box-up.
 Inspection of incoming materials and Review of Material Test Certificates.
 Inspection, fit up of tubular products like Fin welded panels, Headers "KL" fin tubes, "LL" fin
tubes, "G" fin tubes, Extruded fin tubes, Hot dip galvanized (A) tubes and rectangular tubes with
round edge having Aluminum fins (ALEX).
 /Checking the raw materials as per TDC and attestation requirements and allocating it as per
attestation to the given quantity in production drawing.
 Inspection on heater exchanger ( Sea water Heat , Tube Bundle , Stabilizer Condenser , Stripper
Feed Bottom Exchanger , Bimetallic Extruded Fins )
 Specifications, project procedures, relevant codes and standards in the execution of piping
production engineering.
 Review the scope of work as described in the Contract. Well familiar with procedures and
documentation for PMI & CE marking. Compile and ensured timely issue of detailed Pipe work,
Test-packs containing, work-scope description, pipe work fabrication isometrics and Material Issue
Notes.
 Responsible for prepare piping hydro test packs based on PED category, and personnel
involvement in pre-commissioning activities identify SYSTEM and SUB SYSTEMS for precommissioning.
 Mechanical completion Status Index
 Mechanical Completion Check Record s
 Punch list form and reservation Certificate,
 For Piping (check sheets): line index.
 Piping Installation
 Check Pipe Fit-up & Welding
 Conduct Internal Management System & QAQC Audit/Assessment
 Prepare and conduct internal Quality Training
 Prepare, review & verify for project applicable document, such as; PQP, ITP, WPS/PQR, Welder
Qualification, client specification, procedures, drawings, etc. (include prepare Measurement &
Testing Equipments, QC Insp. Tools)
Monitoring result of NDT to maintain welder performance & to reduce the Rejection Rate
 Monitoring and maintain progression completeness of all QC Inspection document such as :
 Daily Welding Record, Field Welding Data Sheet, Pneumatic / Hydrostatic Test Report, UT/MPI
and PT Permit, QC Dep. Monthly Report, QA/QC Handover Documents, etc.
 Lead as Contractor s Representative for Punch list & Commissioning Team.
Knowledge of Code :
 ASME Sec V , ASME Sec VIII Div 1, ASME Sec IX , ASME Sec II C , API 1104 , ASME B 31.1 ,
ASME B 31.3 , AWS D1.1.
 Method: As per client procedure.
Personal Details
Date Of Birth : 14th Dec 1983
 Marital Status : Married
 Nationality : Indian
 Passport No. : G7879959
 Date of issue : 10/04/2008
 Date of expire : 09/04/2018
 UAE driving license : 3634931
Declarations
I assure your good selves that the information furnished above is true and fair to the best of my
knowledge if am selected, I assure that I will discharges my duties diligently , methodically and to the entire
satisfaction of my superiors.
Yours Faithfully
[Candidate's Name .M] |
