| | | 20,000+ Fresh Resumes Monthly | |
|
|
| |
Click here or scroll down to respond to this candidate Candidate's Name
Street Address Webster St.
Fall River MA Street Address
PHONE NUMBER AVAILABLE
Philips Lighting Street Address -2015
Street Address
PHONE NUMBER AVAILABLE
Worked in the anodizing department racking, unracking, and inspecting light fixtures for
any defects or damage. Product was then put on pallets and moved to the next phase of
assembly and shipping. I also worked in the assembly department assembling, packaging,
and preparing the product for shipping filling out necessary paperwork and forms.
Alden Yachts 1996-2013
99 Poppasquash Rd Bristol RI 02809
PHONE NUMBER AVAILABLE
Worked as a marine electrician in the construction of custom made power and sail yachts.
Assisted in planning, layout, and installation of various electrical systems including
power, lighting, HVAC, and entertainment systems. Troubleshoot and repair or replace
various parts and components as needed. Managed the winter storage battery
maintenance program categorizing each boat with its own type of battery system (lead
acid, gel, dry cell) and it own particular charging and maintenance requirements.
Blount Marine 1992-1996
461 Water St. Warren RI
PHONE NUMBER AVAILABLE
Worked as a marine electrician. I performed in various phases of shipboard construction
of small cruise ships for American Canadian Caribbean Cruise Lines (ACCCL)
beginning with layout, fabricating, and installing initial wireways. My duties included
planning and coordinating with other trades in order to facilitate an orderly and efficient
installation of various systems (electrical, piping, etc). Also participated in running main
power, lighting, engine, and machinery control and alarm warning systems. I participated
in sea trials where I performed various engine room and machinery space watches.
RE Derecktor Shipyard of RI 1985-1991
Coddington Cove, Middletown RI
Worked as a marine electrician with cable crew installing main shipboard power
including securing and banding cables and packing watertight transits and swage tubes
during the construction of USCG WMEC270 class cutters 905 through 913. Was
transferred to the electrical testing department where I performed insulation, resistance,
and continuity (I,R and C) tests on cables related to the machinery plant control and
monitoring systems (MPCMS) and troubleshot and repaired or replaced items as
necessary. I also calibrated, tested, troubleshot various components of the tank level
indicating system (TLI). These tests were done under the supervision of the USCG
inspecting officer staff. Items were accepted and signed off only after they were shown to
be working properly and to the satisfaction of the Coast Guard inspectors. I also
participated in sea trials (normally 2-3 days) where I performed engine watches.
Phalo IPD 1983-1985
600 Airports Rd. Fall River MA
Employed as a Tin Pot operator coating bare copper wire with tin in a cable and wire
manufacturing plant. Duties included taking inventory of incoming and outgoing
materials and machinery maintenance.
US Navy 1979-1983
Attack Squadron 12 NAS, Cecil Field Fla
Assigned to Attack Squadron 12 as an organizational level A7-E electrical technician.
Duties included maintaining, troubleshooting, and repairing electrical, electro-hydraulic
and flight instrumentation systems while deployed with carrier Airwing 7 aboard USS
Dwight D. Eisenhower (CVN-69) in the Indian Ocean (1980) and Mediterranean Sea
(1982). Collateral duties included assistance night shift supervisor and tool control petty
officer. Honorably discharged with Navy Good Conduct Medal.
|
